Automatic Sliding Door Mechanism with Sensor
Sectional Drawing,
Features,
1. TUV-CE certification approval
2. Original GERMANY Dunker motor GR 63 * 55, 60V, SG80K, WL2, i=10:1, RE20S
3. Smart PSA control panel(BEDIS)
4. RESET function
5. Max 300kg with one dirve unit ,700kg if two drive unit
6. Modular design ,roller track, guide track and rubber which can allow us to realise different door soluation
7. Self setup and learning system and monitored battery backup – the same with Gilgen SLM Sliding Door
8. Photocell safety ,Obstacle safety ,Emergency stop and Backup battery
9. Easy to repair and adjust
10. Designed and Manufactured in China
Specification,
Door model | Single | Bi-party |
Opening width | 700-3000 | 800-3000 |
Door weight | 300kg | 250kg x 2 |
Closing speed | 500-700mm/s |
Open speed | 500-700mm/s |
Carriage | 2 running and 1 adjusting wheel |
Motor | Dunker motor GR 63 * 55, 60V, SG80K, WL2, i=15:1, RE20S |
Microcontroller | Applying PLC techniques,32bit 30Mhz NXP chips,CANbus techniques |
Manual force | 150N |
Height of profile | 200mm |
Width of profile | 165mm |
Design | Modularity profile,smart bedis |
Power supply | 230V,50Hz |
Adjustable parameter | Speed, Opening Width, Hold-on time, Original resetting |
Ambient temperature | -20C to 50C |
Power consumption | 100W |
Weight | 72kg |
Protecting rate | IP23 |
Components,
Retro-fit kit |
1 | Motor & Gearbox | 1pcs | GR 63 * 55, 60V, SG80K, WL2, i=10:1, RE20S |
2 | Encoder | 1pc | Optical encoder |
3 | Microcontroller | 1pc | 32bit 30Mhz NXP chips |
4 | Radar | 2pcs | Optex OA-203C-2 activation&safety infrared sensor |
5 | PSA control panels | 1set | Intelligent,adjust the whole parameter |
6 | Carriage | 4pcs | 2 running and 1 adjusting wheel |
7 | Tooth belt | 1pc | 8m, fiberglass tensile elements, nylon surface |
8 | Belt clamp | 2pcs | |
9 | Idle pulley | 1pc | Aluminum alloy |
10 | Stopper | 2pcs | Aluminum alloy |
11 | Main cable | 1pc | Insulted&shielded wire |
Profile |
1 | Guide track& rubber | 1pc | 7mm thickenss, Anodize, rubber to absorb working noise |
2 | Roller track | 1pc | 7mm thickenss, Anodize |
3 | Cover | 1pc | 200mm height,anodized |
Options |
1 | Safety beam sensor | 1set | Bea brand |
2 | Electro-mechanical lock | 1set | Bi-stable |
3 | Emergency battery | 1set | 12V,7Ah,contiunously working 1 hours |
4 | Drive unit | 1pc | Dunker motor |
5 | Floor guide | 2pcs | For frame and frameless door |
6 | Glass clamp | 2pcs | 1m length, fit to 10mm,12mm glass |
Factory,
....