86-574-88078488
Automatic sliding glass door
a)Impact force less than 150N
b)Working life 1,000,000 times
c)Single,double door
d)Commercial
Frame Automatic Sliding Door Mechanism
Sectional View,
Intelligence,
1 Applying the PCL(Programmable Logic Controller microcomputer digital chips(RAM, ROM, CPU) to memory ,detect and modify the data of door working, receive and transit the data to whole parts of the electronic components in order to control the door’s working.
2.Equipped with the remote control system (automatic ,lock ,exit only, permanent open ,half-open) and control panels
Safety
1. Solo interface for Safety beam sensor which can prevent from clipping of persons when they cross the door
2. Coordinate with the safety beam sensor’s working ,the door will move reversely when confront with obstacle and then move slow to detect the obstacle all the time .Finally it doesn’t wok normally until the obstacle is removed.
3. Power fails,
1)when don’t have the UPS( battery) ,the door will exchange to the manual model and can open the door by hand.
2)when have the UPS, the door will exchange to the battery working model and door can open work through the battery’s power
4. When Fire emergency and power off, please confirm it is the normally open ,the door will keep open and aid escape
5. Fuse protection at 3A ,250V
6. Protection when working temperature is over setting value
7. Solo interface for electronic lock in case of thief-protection
Reliability,
1. Track’s design is more scientific, firm , and thick to hold more weighted door leaf. European style design.
2. Carriage with three unique plastic roller and anti-lift bracket to work more smoothly ,steady and long.
3. With the help of advanced synchronous belt and perfectly metal idler roller , the door moves very stably
Energy Saving,
1. With semi-open function and the remote control , you can open the door opening width .so this can help to keep the temperature and humidity inside the room and to minimize the costs of the air conditioner as well.
2. 24V, 80W motor can utilize the power efficiently compared with others. Thanks to the European design , operator can utilize the power efficiently.
Technical Datas,
Door model | Single | Bi-Parting |
Door width | 700-1300mm | 600mm-1250mmn |
Door weigh Automatic Sliding Glass Door with Infrared Sensor t | 180kg | 180kg x 2 |
Opening speed | 15cm-50cm/s | 15cm-45cm/s |
Closing speed | 10cm-45cm/s | 10cm-43cm/s |
Hold on time: | 0-9s | |
Motor | 24V, 80W, Bruthless Motor, 60db with highest speed | |
Microcontroller | Applying PLC techniques ,digital microcomputer system, Digital screen | |
Power supply | 110V-250V,60Hz/50Hz | |
Track size | 4200m(L)x 160mm(H)x 120mm(W) | |
Feature | This model door operator is designed with a SWISS Company | |
Components
| (ONE) | Control System | ||
| 1 | Motor | 1 pc | 24V,80W |
| 2 | Gearbox | 1 pc | plastic gearbox |
| 3 | Control unit | 1 set | 16bits MCU,program by HI-LO system |
| 4 | Radar | 2 sets | 24.125Hz,Germany |
| 5 | Remote control system | 1 set | lock,exit only,pernanent open,half-open,automaitc open, power on & off |
| (TWO) | Mechanical parts(Dorma System) | ||
| 1 | Hanger track | 1 set | High strength, 4mm thickness |
| 2 | Moving track | 1 set | Special nylon, quiet and self-lubricated |
| 3 | Carriage wheel unit | 4 sets | Galvanized and adjustable |
| 4 | Belt clip | 2 sets | |
| 5 | Drive timing belt | 1 pc | fiberglass tensile elments,nylon surface,7m |
| 6 | Reversed wheel | 1 set | Matel,Galvanized |
| 7 | Stopper | 4 pcs | Galvanized |
| (THREE) | Optional parts (Backup , BEA photocell, cover, lock ) | ||
Installation Effort
....
